Project 1 Laser Cutting 9/18

Today I successfully laser cut the straight lattice hinge basket part of the project. I created the lattice design using illustrator and exported it as a pdf. Thank you, William Stann on the Robotics Makerspace team for helping me troubleshoot!

 
 

Comments

Post a Comment

Popular posts from this blog

Project 3 - Code

 Here is a copy of the fully integrated code: /* Use a photoresistor (or photocell) to turn on an LED in the dark More info and circuit schematic: http://www.ardumotive.com/how-to-use-a-photoresistor-en.html Dev: Michalis Vasilakis // Date: 8/6/2015 // www.ardumotive.com */ /* Fur Elise Connect a piezo buzzer or speaker to pin 11 or select a new pin. More songs available at https://github.com/robsoncouto/arduino-songs Robson Couto, 2019 */ #include <Servo.h> // Include the Servo library #define NOTE_B0 31 #define NOTE_C1 33 #define NOTE_CS1 35 #define NOTE_D1 37 #define NOTE_DS1 39 #define NOTE_E1 41 #define NOTE_F1 44 #define NOTE_FS1 46 #define NOTE_G1 49 #define NOTE_GS1 52 #define NOTE_A1 55 #define NOTE_AS1 58 #define NOTE_B1 62 #define NOTE_C2 65 #define NOTE_CS2 69 #define NOTE_D2 73 #define NOTE_DS2 78 #define NOTE_E2 82 #define NOTE_F2 87 #define NOTE_FS2 ...
Read more

Project 1 - 3D printing Woot Woot (9/20-9/21)

Image
  I was so happy with the way my prints came out for the most part. I was so excited, that I totally forgot to take pictures of them printing. That is something I plan on improving for the next project series of blog posts. My snake printed beautifully and after removing the supports and sanding it down, it was ready for painting. I also decided to keep some of the support pattern as it added a cool looking texture to the piece. As for the mezmar horn, the print was successful. However, the 3D printed threaded parts were not 100% the best idea. While they held strong, after removing and screwing the piece back in twice it broke and the screw part got stuck in the cylinder. The Robotics Makerspace team and I brainstormed ways to fix this issue. I ultimately decided to go with the pin and snap piece option. I printed another piece to fit into the hexagon and superglued a metal pin within the pieces. Both the snake head and the horn feel sturdy.
Read more